Installation, dismantle of a window sill

Replacing and installing a window sill

Installation of a plastic window sill may be needed not only in cases when a window is being replaced, but also when a room is being redeveloped or an old element is damaged. You can do the work yourself or using the help of a qualified wizard.

The modern construction market offers a variety of structural and species options for elements.

The most common models are plastic. PVC window sill installation going fast enough. Such product options are budgeted. The element is characterized by excellent performance. It is very practical and reliable, has a high resistance to thermal and ultraviolet radiation.

Wood surfaces are also quite popular. They are environmentally friendly, as well as plastic models, but during operation they do not deform or break. Acrylic models, despite the high cost, are very popular. They do not deteriorate if they accidentally spill coffee or drop a cigarette.


Tools needed to replace the surface

In order to PVC window sill installation to complete, it is necessary to prepare the necessary tools. For work you will need:

  • hacksaw;
  • putty knife;
  • rubber hammer;
  • scrap;
  • chisel;
  • hammer drill;
  • cross type screwdriver or screwdriver;
  • gloves.

Window sill mounting It can happen without some tools, but it is better to prevent all unforeseen circumstances, to collect all the devices.


Steps for removing the window sill

To installation of a plastic window sill successful, it is necessary to carry out a whole range of work. First of all, you need to measure the surface and order a replacement. After prepare the tools, and start window sill dismantling. This process does not take much time. To remove the metal-plastic construction, you will need to initially file the mounting foam with a hacksaw. Then, in the same way, remove the liquid plastic located at the joints of the slopes of the coating. After removing the layer, pull the metal-plastic construction towards you. If failed dismantling the plastic window sill, repeat the previous steps, and then try to remove it again.

When the surface is dismantled, you will need to process the wall to install a new structure. To do this, remove debris and dust, as well as the remains of foam and mortar.


Setting a new item

We have a service available atwindow sill installation price, in Kiev we produce it quickly and efficiently.

The whole process begins with the fitting of a new design. To do this, cut off the excess parts from the element on the sides, and then check the grooves in which the canvas will be installed.

Please note: the gaps and openings that are formed during the fastening of the structure must be repaired. For this, you can use putty or cement mixture. Treat the contact surface of the element and the frame with silicone sealant. This will eliminate the voids through which cold air will enter the house.

Using a level, check the horizontal structure, and then place the load on the surface. Foam the strobes on the side and back with foam.

If you are interested in window sill installation price, contact us. We offer our customers the lowest cost for the services of craftsmen.

Company employees are specialists in their field. They will quickly remove the old surface and install a new one.

Discover, how much does it cost to install a window sill you can also call the master to your home by telephone or through the feedback form.

Still have questions? Call, we will be happy to answer them.


Reinforced-plastic structures (windows, doors, balcony systems …) are a high quality product. Despite this fact, nothing lasts forever. Even the best design can fail after a long period of time, poor operation or harsh climatic conditions. One of the main prerogatives of our company is the resuscitation (repair) of metal-plastic structures.


Hot Line: 38 (044) 383-26-16, 38 (067) 430-40-09

All work begins with diagnostics, and only after a thorough check of the design of the service consultant and your consent, the master at the appointed time with the right tool and material begins to work.


We produce

  • Window systems production;
  • Door production;
  • Design of balcony systems;
  • Window hardware manufacturing;
  • Production of mosquito nets;
  • Supply and ventilation valves;
  • Windowsills of famous brands;
  • Manufacture of metal components (Visor, inflow reduction ….) of any shape;
  • Anti-burglary systems, child protection systems;
  • Handles;
  • Blinds – vertical, horizontal, day-night, roller blinds, Roman, wooden.

Our company “Ilbosko” will not only provide you with quality service, but will also be able to install a new metal-plastic of any complexity, taking into account any wishes. And also provide a full range of components and consumables.


Benefits of working with us


High quality guarantee


100% personal responsibility


Latest developments


More than 10 years of experience


Free diagnostics


044 383 26 16

067 430 40 09

093 638 11 59





St. Nikolaya Zackrevskogo 34E





Saturday, Sunday: