fbpx

Replacing hardware

Window fittings: causes of failure and replacement steps

In order for plastic windows to work properly and last for a long time, it is necessary not only to install them correctly, but also to constantly monitor them. Some users during the operation of the structure are faced with the fact that it allows cold air, dust and moisture to pass through, freezes, the level of sound insulation decreases. In such cases, urgent replacement of plastic window fittings.

Before dismantling old elements, we recommend that you try to adjust the hinges and the handle. If this does not help, you will have to install new components.

Note: replacement of fittings in plastic windows should be done as soon as a violation of the design has been identified. This will prevent more serious violations – damage to the sash or frame, and extend the life of the metal-plastic construction.

 

Selection of components

Replacing hardware on plastic windows should begin with the selection of new elements. In order for the dismantling process to go faster, and the design worked in the same mode, it is necessary to find components that are identical to the old ones.

You can only find out the brand and features of the part with a thorough inspection. The removable element must be specially marked. In the event that there are no inscriptions on the part, you just need to remove it and pick up a similar one in the store.

As a rule, on the market are components manufactured by firms:

  • Maco;
  • Roto;
  • Fuhr;
  • Siegenia;
  • Axor.

Replacement parts of Maco, Roto and Fuhr brands are the most expensive. At the same time, these elements are very easy to install, have a high level of reliability and stylish design. If the budget is limited, we recommend that you pay attention to the details of Siegenia and Axor. For these elements are also characterized by good performance.

 

The process of installing new components

Before it is produced replacement of accessories in Kiev, it is necessary to prepare the tools that may be needed in the process of dismantling and installing new elements. Useful for work:

  • cross and slotted screwdrivers;
  • pliers or platypuses;
  • hexagons and L-shaped stars;
  • silicone and machine grease.

Replacement of accessories of plastic windows, Kiev recommends ordering this service from us, begins with the dismantling of the decorative covers of window hinges. Then you need to remove the sash. To do this, knock the top pin off the hinge. Perform this procedure with the window closed. After this, it is necessary to carefully remove the leaf from the lower pin.

Lean the dismounted sash against a vertical surface so that the handle is located at the top. To remove the window handle, it is necessary to pull off and rotate the decorative trim, and then unscrew the retaining screws.

Next, you should remove the screws from the sash trim, accessories located on the central lock, middle locking elements in the upper and lower parts of the sash, as well as corner switches. When all the parts are removed, you can proceed to dismantle the reciprocal levels and install new components.

This process requires special care and appropriate skills, therefore, if you have not previously encountered such work, it is better to call the wizard.

We have a service replacement hardware plastic windows price affordable. At the same time, all specialists have excellent practical skills, so they quickly dismantle old parts and fasten new ones without damaging the metal-plastic construction.

Still have questions? Call, we will be happy to answer them!

alt

Reinforced-plastic structures (windows, doors, balcony systems …) are a high quality product. Despite this fact, nothing lasts forever. Even the best design can fail after a long period of time, poor operation or harsh climatic conditions. One of the main prerogatives of our company is the resuscitation (repair) of metal-plastic structures.

alt

Hot Line: 38 (044) 383-26-16, 38 (067) 430-40-09

All work begins with diagnostics, and only after a thorough check of the design of the service consultant and your consent, the master at the appointed time with the right tool and material begins to work.

alt

We produce

  • Window systems production;
  • Door production;
  • Design of balcony systems;
  • Window hardware manufacturing;
  • Production of mosquito nets;
  • Supply and ventilation valves;
  • Windowsills of famous brands;
  • Manufacture of metal components (Visor, inflow reduction ….) of any shape;
  • Anti-burglary systems, child protection systems;
  • Handles;
  • Blinds – vertical, horizontal, day-night, roller blinds, Roman, wooden.

Our company “Ilbosko” will not only provide you with quality service, but will also be able to install a new metal-plastic of any complexity, taking into account any wishes. And also provide a full range of components and consumables.

CALL A CONSULTANT'S SERVICE

Benefits of working with us

alt

High quality guarantee

alt

100% personal responsibility

alt

Latest developments

alt

More than 10 years of experience

alt

Free diagnostics

Phone:

044 383 26 16

067 430 40 09

093 638 11 59

Email:

office@ilbosko.com

Address:

Kiev

St. Nikolaya Zackrevskogo 34E

Odessa

Schedule:

Monday-Friday:

9.00-20.00

Saturday, Sunday:

9.00-17.00